Text im Video
00:00"Everywhere where agility
00:05high attention is required - especially when heavy loads are involved.
00:10"This is also the case at the Risse and Wilke steelworks in Iserlohn
00:13where metals are rolled to a thickness of 0.2 to 6 mm.
00:17Special coil stackers are used for the supply and removal of the metal coils.
00:23The forklift truck moves throughout the whole plant
00:27delivering and collecting material.
00:29An individual load can be between 6 and a max. 18 tons.
00:34We are talking about approx. 3000 tons in 24 hours.
00:37"Even with driver aids on the forklift
00:43and must always have 360° vision.
00:45"He has to monitor his load
00:50"At the same time he has to be aware of what is happening around him
00:53e.g. colleagues and contractors walking around the plant.
00:56He cannot assume that the colleague who is walking around plant has seen him.
01:00But he must be sure to see him and thus to stop in time.
01:05Otherwise it can easily come to critical situations which we want to avoid.
01:10"In addition to possible damage to property and personal injury
01:12work processes are also affected.
01:15"Any incident involving the forklift
01:19could lead to this area being completely closed off
01:22The 3D collision warning system from ifm helps to avoid such situations.
01:28The system permanently monitors the rear of the forklift truck
01:32and gives the driver visual and acoustic feedback.
01:36All obstacles are reliably detected.
01:39A key feature is that people wearing reflective clothing
01:42can be registered early by the 3D system and the driver can be warned.
01:47This leaves enough time to slow the truck down and stop in time.
01:52Commissioning the system is very easy.
01:55"In addition to the sensor (Hersteller)
01:59the Application Package contains all the necessary components
02:02for uncomplicated installation and cabling.
02:07"With just a few parameters
02:11and is ready for use in no time.
02:17Different zones can be defined so that the driver is only warned when it is really necessary.
02:25"This means that the O3M can be used to its full potential depending on the situation
02:29which helps to reliably prevent accidents.
02:33"At the same time
02:38"The system is of course very good at minimising risk
02:41i.e. I can use it on forklift trucks to prevent employees from entering the danger zone
02:47and to prevent a dangerous situation or risk situation
02:49from occurring in the first place.
Letzte Änderung: 10.08.2020